EB-P501-20Q-10 Seco-larm ENFORCER Passive Video Balun with Pigtail Connector

The fast, easy, and low-cost way to connect a CCTV camera to a monitor, multiplexer, or video recorder. The EB-P501-20Q video balun allows the video signal of a single CCTV camera to be transmitted long distances over low-cost CAT2 to CAT6 unshielded twisted pair (UTP) cable. Great for both full-motion color and full-motion monochrome cameras, this balun increases the flexibility of where such cameras can be mounted.

This CCTV balun also works over existing UTP cabling, making it perfect for use in nearly any building or across an entire campus. The EB-P501-02Q's patented design features built-in terminals for power OR data pass-through.

• Video Format NTSC, PAL, SECAM
• Maximum Input 1.0Vp-p
• Insertion Loss < 2dB per pair from DC~6MHz
• Return Loss > -18dB from DC~6MHz
• Frequency Response DC~6MHz
• Attenuation DC~6MHz, 2dB max
• Common Mode Rejection 60dB, 15kHz~6MHz
• Impedance Coax, Male BNC 75Ω @ 1MHz, Terminal Block 100 Ω@ 1MHz
• DC Loop Resistance 52Ω/1000' (18Ω/100m)
• Differential Capacitance 19pF/ft max. (62pF/m max.)
• Power No power required
• Max. Amperage 3A@12VDC, 1.5A@24VAC
• Operating Temperature 32º~131º F (0º~55º C)
• Storage Temperature -4º~185º F (20º~85º C)
• Humidity Range 0~95%
• Wire Type UTP (Unshielded Twisted Pair) 16~24 AWG
• Wire Category Category 2 or better
• UTP Connection Gold-plated screw Terminals
• Case ABS Plastic

EB-P501-20Q-10 Spec Sheet