EFLOW3NBV Altronix Power Supply Charger Single Output 12/24VDC @ 2A Aux Output FAI LinQ2 Ready 220VAC Board

Altronix eFlow3NBV power supply/charger converts a 220VAC (working range 198VAC - 256VAC), 50/60Hz input into a single 12VDC or 24VDC output. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Specifications

Input

• Voltage - 220VAC (working range 198VAC - 256VAC), 50/60Hz, 2.1A max
• Fusing - 5A/250V

Outputs

• Voltage - 12VDC or 24VDC selectable
• Current - 2A continuous max
• Auxiliary - 1A (unswitched)
• Other - Overvoltage protection Filtered and regulated

Back-up Battery (not included)

• Type - Sealed lead acid or gel type
• Fuse Rating - 3A/32V
• Failover - Upon AC loss, instantaneous

Fire Alarm Disconnect

• Supervised - Latching or non-latching
• EOL - 10K Resistor

Supervision

• AC Failure - Form “C” contacts
• Battery - Form “C” contacts
• Low DC Power Shutdown - Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply) Prevents deep battery discharge

Indicators (LED)

• Input - 220VAC is present
• DC Output - Powered
• Battery - Discharged or not connected

Agency Listings

• CE - European Conformity

Physical and Environmental

• Dimensions (L x W x H) - 10” x 8” x 4” (254mm x 203.2mm x 101.6mm)
• Product Weight - 0.7 lb. (0.32 kg)
• Shipping Weight - 0.8 lb. (0.36 kg)
• Operating Temperature - 0ºC to 49ºC (32ºF to 120ºF)
• Storage Temperature - – 20ºC to 70ºC (– 4ºF to 158ºF)
• Relative Humidity - 85% +/– 5%
• BTU/Hr. (approx.) - 12VDC: 12 BTU/Hr, 24VDC: 25 BTU/Hr

EFLOW3NBV Specifications PDF