LE-535 Louroe Electronics AOP-535 4" Speakerphone with Pushbutton for IP Cameras

AOP535 is a speaker/microphone. It is designed to interface with various modes of audio/video transmission systems. It provides full duplex bi-directional audio with the receiving source (DVR, PC soundcard, IP Network cameras with audio and video servers with audio). The AOP535 integrates a 1-inch lighted, vandal resistant call button with a normally open momentary “dry” contact output that can be connected to an alarm input, doorbell circuit, etc. The unit can be used for partial outdoor applications such as mounted to an outdoor exterior wall however the unit MUST NOT be mounted in locations that are susceptible to excessive direct water spray.

Specifications (Microphone)

• Type - Electret Condenser
• Microphone output - line level (0 dB @ 1kW)
• Microphone element sensitivity - -45dB
• Frequency response - 40 Hz to 15 kHz 1 dB
• Output Impedance - 600 unbalanced
• Supply voltage- Supply voltage

Specifications (Speaker)

• Speaker Power output - 2W
• Speaker Impedance - 8W
• Speaker magnet - 3 oz. ceramic
• Speaker size - 4” (10cm)
• Weight, net - 3 Lbs. (1.4 Kg)

Specifications (Mechanical)

• Dimensions (Face Plate) - 6 1/4"H x 8"W metic (158mm H x 203mm W)
• Backbox for AOP-535/545
• Surface Mount Box (metal) - 6 1/4"H x 8"W x 2 3/4”D, metric (158mm H x 203mm W x 70mm D)
• Flush Mount Box (plastic)
  • Backbox Portion - 5"H x 6 7/8"W x 2 5/8”D, metric (127mm H x 175mm W x 67mm D)
  • Total including flange - 6 1/4"H x 8"W x 2 5/8”D, metric (158mm H x 203mm W x 67mm D)

LE-535 Specifications PDF