500716 Muxlab LongReach 3G-SDI to HDMI Extender Kit

The 3G-SDI & LongReach 3G-SDI toH DMIExtend erKitconverts HD-SDI to HDMI and then transmits it up to 330 ft (100m) via Cat5e cable at all resolutions in a point-t o-point The500715 allows a more HDMI display to be used instead of a more costly HD-SDI monitor in video production applications. Furthermore the 500715 eliminates the need for a separate HD-SDI-to-HDMI converter and HDMI extenderthere by minimising the number of points offailure and providing a total end-to-endsolution.

Specifications

• Environment - SDI single link: SD, HD & 3G
• Devices - Monitors supporting the original SDI rate only
• Standard supported - SMPTE 259M (270Mb/s), SMPTE 292M & SMPTE 424M
• Bit rates - 270Mb/s, 1.485Gb/s & 2.97 Gb/s (automatic selection)
• Video format supported(monitor must support the original SDI rate)
  • SD : 525i, 59.94/60Hz & 625i, 50Hz
  • HD
  • 720p @ 60Hz, 50Hz, 30Hz, 25Hz & 24Hz
  • 1080i @ 60Hz & 50Hz
  • 1080p @ 30Hz, 25Hz & 24Hz
  • 3G - 1080p @ 60Hz & 50Hz
• Sound format supported - 48kHz @ 24 bit, 20 bit & 16 bit
• Indicators
  • Power - SDI Sync (on rx side only)
  • RJ45 Sync - Video (on tx side only), Sound (on tx side only), HDMI Sync (on rx side only)
• Connectors
  • One BNC 75 ohm female on source side
  • One HDMI on receiver on receiver side
  • One RJ45S for Cat5e/6 unshielded twisted pair
  • One power connector, 2mm
• Maximum Distance - UTP Cat 5e: 500 ft (150 m) UTP Cat 6: 500 ft (150 m) for 500716 (Maximum distance applies for all format and speed between boxes. On SDI side: 450 ft (140m), On HDMI side: 15 ft (5 m) typical)
• RJ45 Pin Configuration(Use EIA/TIA 568A or 586B straight-through wiring only)
  • RJ45 Link
  • Pin 1 (R)
  • Pin 2 (T)
  • Pin 3 (R)
  • Pin 4 (R)
  • Pin 5 (T)
  • Pin 6 (T)
  • Pin 7 (R)
  • Pin 8 (T)
• Cables
  • One straight Cat 5e/6twisted pair cables required
  • One 75 ohm coaxial cables with 75 ohm BNC required
  • One HDMI cable
• Power Supply - Two 100-240V/5VDC 6W power supplies with interchangeable blades for NA, Europe and UK
• Power Consumption
  • Transmitter : 4 Watts
  • Receiver : 6 Watts
• Temperature
  • Operating : 0° to 40°C
  • Storage : -20° to 85°C
  • Humidity : Up to 95% non-Codensing
• Enclosure - 6061 Aluminum alloy
• Dimensions - 4.50” x 3.00” x 1.25” (11.4 x 7.6 x 3.2 cm)
• Weight - 2.5 lb. (1.1 kg)
• Warranty - 2 years
• Order Information - 500716 Long Reach HD-SDI to HDMI Extender Kit

500716 Specifications PDF

500716 Manual