EBRIDGE100RM Altronix EoC Single Port Receiver 100Mbps Passes PoE/PoE+

eBridge100RM is a versatile dual solution Ethernet receiver/media converter which transmits data at 100Mbps full duplex and power over Coax cable or extended CAT5e cable in a PoE+ compliant format. The eBridge100RM is powered via a PoE midspan such as the Altronix NetWay series or by an endspan. The receiver passes the PoE(+) compliant power over cable to the eBridge100TM/eBridge100ST transceiver which in turn passes this power to an enabled IP Camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over existing coax or structured cable.

Specifications

Input

• Powered by midspan or endspan.
• PoE compliant to IEEE 802.3af (15W) andPoE+ compliant to IEEE 802.3at (30W).

Coax

• Coax Throughput rated at 100Mbps at distances up to 300m.
• Speed - 10/100BaseT, half/full duplex, auto negotiation.
• Connectivity - BNC, RG-59/U or similar.

CAT5e or Higher

• Throughput rated at 100Mbps at distances up to 500m.
• Speed - 10/100BaseT, half/full duplex, auto negotiation.
• Connectivity - RJ45, auto crossover

Indicators (LED)

• Yellow and Green LED (by RJ45 jack) - IP Link status, 10/100Base-T/active.
• Green LED - PoE ON.

Agency Listings

• UL/cUL - UL 60950-1 (Information Technology Equipment).
• CE - European Conformity.
• C-Tick compliant

Physical and Environmental

• Dimensions (L x W x H) - 3.5" x 4.375" x 1" (88.9mm x 111.1mm x 25.4mm).
• Product Weight - 0.25 lbs. (0.11 kg).
• Shipping Weight - 0.4 lbs. (0.18 kg).
• Operating Temperature - -20°C to 49°C (-4°F to 120.2°F).
• Storage Temperature - -30°C to 70°C (-22°F to 158°F).
• Relative Humidity - 85% +/-5%.
• Operating Altitude - -304.8 to 2,000m.

EBRIDGE100RM Specifications PDF

EBRIDGE100RM Manual