[DISCONTINUED] EDKT-H KBC Networks H264 MPEG4 SP MJPEG encoder MPEG4 decoder kit with enclosure & mounting hardware Desktop unit US power plug

The KBC Encoder is a high resolution, IP Ethernet (LAN/WAN) ready, digital video server/encoder. The unit encodes video and data from a new or existing analog camera to H.264 digital video for streaming over a wired or wireless network. Specifically designed to meet the increasing need for high quality, reliable, real-time video applications, the encoder is ideal for retrofit or new video surveillance applications. For ultimate flexibility, an encoder may be connected via a Wireless Ethernet System (or network of Mesh nodes) in camera locations where it is not feasible to run wire. For end-to-end analog connectivity, the Encoder should be used with a Decoder.

Specifications

Image

• Compression - H.264, MPEG-4 SP, MJPEG
• Image Frame Rate - 30fps @ 720 x 480 (full D1, NTSC),25fps @ 720 x 576 (full D1, PAL),30fps @ 352 x 240 (CIF NTSC)
• Multi-streaming - Simultaneous dual streams based on 2 configurations
• Bit Rate - 28kbps - 6Mbps (per stream)
• Bit Rate Mode - Constant, variable
• Image Enhancement - Brightness, saturation, contrast
• Privacy Mask - 4 configurable regions
• Text Overlay - User defined text on video

Network

• Protocol & Service - TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour
• Ethernet Port - 1, Ethernet (10/100 Base-T), RJ-45 connector
• Security - IP address filtering; HTTPS encryption; Password protected user levels; IEEE 802.1X network access control

Alarm

• Alarm Trigger - Video motion detection (3 regions); External device through digital input
• Alarm Response - Notify control center; Go to PTZ preset point or preset tour; Change camera settings; Command other devices; E-mail notification with snapshots; Upload video, snapshot to FTP server; Activate external device through digital output

Interface

• Analog Video Input - 1, CVBS, 1.0Vp-p with 75Ω BNC connector
• Digital Input - 1, terminal block
• Digital Output - 1, terminal block
• Serial Port - RS-485, RS-422, RS-232, terminal block

Mechanical

• Dimensions (W x H x D)(1) - 103mm x 28.5mm x 76 mm (4.06" x 1.12" x 2.99")
• Weight - 195 g (0.43 lb)
• Certification - Video Encoder: CE, FCC; Adapter: CE, TUV-GS, UL, RCM, CCC

Power

• Power Requirements - 12 Vdc, 3.6W
• Power Supply - 12 Vdc ±10% wall transformer supplied

Environmental

• Humidity - 10% ~ 85% RH
• Operating Temperature - -30°C ~ +70°C (-22°F ~ +158°F)

Approvals

• Encoder - CE, FCC,
• Adapter - CE, TUV-GS,UL RCM, CCC

Integration

• ISV Integration - Software Development Kit (SDK) available
• Firmware Access Browser - Microsoft Internet Explorer 6.0 or above

EDKT-H Specifications PDF