FS-3500E TAKEX 33' Ultraviolet Sensor, Ceiling mount, "Snap in Base", Battery 3V or External Power 10 - 30VDC

The FS-3500 Flame Sensor immediately detects UV rays contained in flames to trigger a pre-recorded "flame prohibition" or "non-smoking" message output in a choice of 5 languages; English, Spanish, Japanese, Chinese and Korean.

Specifications

• Model - Flame sensor
• Model number - FS-3500E
• Detection system - Ultraviolet Rays detection (185 ～ 260nm)
• Detection distance - 10m (7cm flame)
• Detection angle - 120 degrees Conically
• Detection sensitivity - Detection sensitivity ：2 levels (H [100%], L [50%]) Detection timer ：4 setps (1s, 3s, 6s, 15s)
• Power supply -Type-AA alkaline battery (LR6) 2pcs / DC3V…included External wiring DC10 ～ 30V (Polarized)
• Battery life - Type-AA alkaline battery Approx. 2 years (Stand-by) (Note above figure is just a reference and not guaranteed)
• Power consumption （External DC power） - Stand-by ：40mA or less Alarm ：300mA or less
• Signal output - Relay contact output N.O./N.C. selectable Detection time plus 2 sec. Output DC30V 0.1A
• LED - Indication ： RED Alarm ： Flash during message output Low battery ： Flash 0.1sec every 5sec
• Message - 5 languages, Non-smoking, Fire prohibition, Buzzer sound, Long/short message selectable, Message repeat : Once/twice selectable, Volume : Mute - Max. 80dB (1m from the sensor)
• Tamper - Relay contact output N.C. is issued when the sensor unit is detached from the base unit Output AC/DC30V 0.1A
• Wiring - By terminals
• Ambient temperature - −10°C ～ +60°C (Without condensation) (Battery performance may decrease under 0°C or beyond +40°C)
• Installation - Indoor
• Functions - Tamper signal, Low battery indication
• Apperance - ABS Resin (White)

FS-3500E Specifications PDF