The MC722MT-2 is a compact dual fiber media converter. Each converter features LED diagnostics for power, activity, link and full duplex/half duplex operation. All converters are fully compliant with the IEEE 802.3 and 802.3u Fast Ethernet standards and feature one RJ45 10/100BaseTX port and one Fiber Optic 100BaseFX SC port. Each unit is powered by an external power supply (included).The MC722MT-2 is a transceiver requiring very little installation time and minimal set up or configuration. Installation requires simply connecting two fibers to the fiber duplex SC connectors on the transceiver. Once powered up and connected the transceiver instantly connects to the network or companion MC722MT-2 transceiver and begins operating as a full-duplex 100BaseT Ethernet conduit. The MC722MT-2 is completely transparent to the network; it has no IP or MAC addresses and does not require any additional setup or programming. Connect your network devices by connecting their RJ45 connectors into the network ports of the transceivers. LEDs on the devices indicate the presence of power, transmission link and network signals for easy troubleshooting.The MC722MT-2 extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow. The MC722MT-2 will auto-negotiate bandwidth to compensate for wire attenuation and losses that occur from wire length, signal noise and interference.
Specifications
MC722MT-2AT Specifications PDF
MC722MT-2AT Installation Manual
Product Reviews
Write your own review
Rate this product:
